Midmark Ritter M11 Ultraclave Autoclave Specifications:
Overall length: 23.8"
Overall width: 17.8"
Overall height: 17.8"
Chamber: 11" X 18"
Trays: Two large Two small
Electrical: 120 VAC, 60 Hz, 12 AMPS
The Midmark Ritter M11 autoclave is a fully-automatic and has microprocessor-controls. This Midmark Ritter M11 autoclave sterilizer has a 9-inch, round, stainless-steel chamber. The exterior dimensions of the Midmark M9 Sterilizer are 19 inches high by 19 inches wide by 24" inches deep (handle included).
The sterilizer/autoclave’s system operates at 110/120 volts ± 5 %, 50/60 Hz, with a loading of 1.4kW. The Midmark Ritter M11 autoclave sterilizer is usually configured for a plug-in connection and requires a 20- ampere circuit breaker. A dedicated electrical circuit is recommended for fault-free operation.
The autoclave's microprocessor- controlled parameters are constantly monitored to assure proper sterilization for each program cycle selected. The controller sequences through the complete cycle at the touch of one of the four icon-marked programs on the Pad switch (e.g., wrapped, unwrapped, paper/plastic pouches, or liquids).
All the Midmark Ritter M11 autoclave’s selections are preset for drying except for the liquids cycle. Upon completion of the sterilization cycle, the unit exhausts and the door automatically opens. Cycle completion is announced by five series of three audible beeps. The display shows "Drying" for the next 30 minutes. At the end of the drying period, another audible signal consisting of five series of three beeps occurs.
The Ritter M11 autoclave display then shows "Complete." All sterilization parameters (date, time, pressure, and temperature), are digitally displayed and can be recorded with an optional printer. The digital display indicates functioning checks during operation and error codes for testing and troubleshooting. The autoclave sterilizer is UL Listed and ISO 9001 certified.